375 Tools For Sale near Bristol

Sort: 
View: 

    Regional freeads (within 50 miles of Bristol)

  • Bridgend - 41 miles

    GOOD CONDITION USED SDMO PETROL TECHNIC 6500 E AVR GENERATOR JUST BEEN SERVICED / 487 HOURS EXCELLENT UNIT FOR ALL YOUR POWER NEEDS

    Read more
  • KAMASA 6 INCH BENCH VICE WITH 360 DEG SWIVEL
    7

    £30

    Marlborough - 39 miles

    Up for sale is a used bench vice that is in good working order. The vice opens about 8 " (21cm) with good grips. Rotates 360 degrees £30 for quick sale

    Read more
  • welder, heavy duty arc welder
    1

    £30

    Porth - 37 miles

    This is a Star weld 190 amp arc welder, i dont have leads for this one, nice old industrial arc welder, the duty cycle is 100% 2mm, 80%2.5mm, 45%3.2mm and 20%4mm, so as you can see not a light duty welder, your welcome to bring your own leads for testing, or i can test with...

    Read more
  • compressor
    4

    £40

    Porth - 37 miles

    This is a elektra buckum compressor it is 40l, 8bar, i dont have a fitting for connecting a airline on it i took it off to put a bayonet fitting on, but cant find either now, but can be seen running or your welcome to bring a fitting and airline to test.

    Read more
  • mig welder Clarke 85enb
    2

    £50

    Porth - 37 miles

    I have for sale a clarke 85enb no gas mig welder, it is in good condition the reel of wire you see is the original that came with it, so very little wear on the drive rollers or liner. Perfect for welding car bodywork, can be used outside as the wire is flux cored.

    Read more
  • welding
    2

    £200

    Ferndale - 39 miles

    3m ad flow air Fed welding shield with battery and charger and bag .used but in good condition .

    Read more
  • SWA crimping kit new
    2

    £45

    Bargoed - 33 miles

    New Swa crimping kit Crimped lugs from 6mm - 50mm. Comes with a selection of new lugs.

    Read more
  • Snap on tool chest
    7

    £695

    Radstock - 18 miles

    A seven drawer snap on tool chest with a multi drawer top box, in immaculate condition and hardly used.Selling complete will not split.

    Read more
  • Milling machine
    3

    £435

    Minehead - 49 miles

    Hobbymat milling machine good working order comes with drill chuck collet chuck with 12 collets and milling vice cash on collection only no time wasters

    Read more
  • CLARKE CL300M VARIABLE SPEED METAL LATHE &  MANY EXTRAS  ** UNUSED**
    9

    £500

    Newport - 20 miles

    This superb, precision mini lathe is designed to perform a wide variety of tasks. It is solidly manufactured, with a cast iron bedway and has many features usually found on machines twice its size and price. Extras as seen in photos above.

    Read more
  • Brand new chrome vanadium socket set.
    3

    £15

    Swindon - 38 miles

    This set of metric sockets ideal for the do it yourself mechanic. Unused , perfect condition.

    Read more
  • battery hedge trimmer
    4

    £25

    Cirencester - 30 miles

    Fully working ready to go no teeth missing or damaged

    Read more
  • HAILO 8925 HOBBYSTEP. 5 step ALUMINIUM LADDER In good condition
    8

    £25

    Bristol - 6 miles

    HAILO 8925 HOBBYSTEP. 5 step ALUMINIUM LADDER In good condition The measurements are106cm to platform. bargain £25

    Read more
  • Ely flip over saw
    3

    £200

    Cardiff - 28 miles

    Good working order can demonstrate, comes with two blades one cross cut and one rip cut, this saw is very accurate

    Read more
  • Titan Breaker
    1

    £60

    Yeovil - 32 miles

    Titan breaker, works perfectly.

    Read more
    • Ladder levelling stand.
      2

      £30

      Yeovil - 32 miles

      Ladder levelling stand

      Read more
    • Dewalt Radio
      2

      £40

      Yeovil - 32 miles

      Dewalt 240v site radio

      Read more
    • OLD TYPE WOODWORKING TOOLS
      1

      £40

      Cwmbran - 24 miles

      As seen in photo old woodworking tools. Offers considered.

      Read more
    • Swiss Kraft, 4 Stroke Petrol Generator - Mainland UK delivery
      1

      £200

      Taunton - 38 miles

      Swiss Kraft, 4, Stroke, Air Cooled, 9500W Petrol Generator. ------------------------------------------------------------------------------ Continuous Power Rating of 3000 Watts Powerful 6.5HP OHVU Unleaded Petrol Engine The Generator Sockets are 22OV Europlug and...

      Read more
    • Table top circular saw
      5

      £40

      Newport - 20 miles

      Table top circular saw complete with 2 blades. Used once no longer needed.

      Read more
    • Axminster Combination woodworking machine
      3

      £3,300

      Sherborne - 38 miles

      Hi I'm selling my Axminster combination woodworking machine I purchased it about 1 year ago brand new and have since only used it a few times it is in perfect working order except for the kill switch on the side that has broken off however this does not affect the...

      Read more
    • Union Door Lock
      5

      £10

      Maesteg - 46 miles

      UNION Door Lock, never been used but has some marks on it.

      Read more
    • Welding equipment £135.00
      5

      £135

      Cardiff - 26 miles

      Contains all the components apart from the gas bottles. As you can see from the pics the welding and cutting equipment comes in a case. This item is hardly used. Also included is a trolley and additional gauges. Viewing collection cf11 7hz Prefer to sell as 1 lot...

      Read more
    • Dewalt kit
      2

      £600

      Bristol - 6 miles

      Selling 6pc dewalt kit grinder,torch,jigsaw,circular saw never been uses drills been uses couple times got 3 4ah batteries +charger got the lights on battery so can tell when need charging all fits in to box carry case got receipt aswell 3months old

      Read more
    • SNAP ON TOOL CART KR488 & TOOLS
      8

      £480

      Witney - 49 miles

      JOBLOT TOOLS IDEAL FOR GARAGE WORKSHOP TOOL ''''USED MARKS AND WORN ALL WORKING CONDITION'''''' SNAP ON TOOL CART KR-488 USED WORKING CONDITION 8PC TENG TOOL 1/2DR SOCKETS 7/16 5/8 11/16 13/16 15/16 1'' 1-1/16...

      Read more
    • 110v makita mitre saw
      2

      £100

      Cwmbran - 23 miles

      Selling my 110v makita mitre saw as I don't use it. Perfect working order

      Read more
    • Alphabet and Number Metal Stamps
      1

      £20

      Cwmbran - 24 miles

      Full Alphabet and Number Metal Stamps. Good condition P+P if required extra.

      Read more
    • Oval Gear Diesel Fuel Flow Meter 12-120 LPM, 1"BSP Brand New, 10 Available, RRP £142.50 + VAT
      1

      £45

      Blandford Forum - 46 miles

      Surplus to requirements, 1" BSP Oval Gear Flow Meters, suitable for use with flow ranges of 12 to 120 Litres Per Minute (NO GOOD FOR DOMESTIC HEATING LINES) suitable for refuelling or other fluid measurement applications. Suitable for use with diesel, heating...

      Read more
    • Orange 220 / 200 Litre Plastic HDPE Barrels, Drum Tank Water Butt Waterbutt Brewing Home Brew
      1

      £15

      Blandford Forum - 46 miles

      Orange 220 / 200 Litre Plastic HDPE Barrels, Drum Tank Water Butt Waterbutt Brewing Home Brew 220 litre plastic drums, used once for transport of food products in brine, now empty. Solid construction, lid screws off, waterproof rubber seal. Colour orange, excellent...

      Read more
    • Heavy duty trolly
      5

      £40

      Abertillery - 30 miles

      Heavy duty trolly

      Read more
    • Leaf Blower Vac
      2

      £20

      Cardiff - 30 miles

      MAC Allister MBV 3000 Watt Leaf Blower Vac. House move forces sale.

      Read more
    • Easy dig garden spade/folk
      1

      £75

      Blackwood - 30 miles

      Hello I have for sale a easy dig garden spade/folk as new less than 16 months old only used a handful times

      Read more
    • Galvanised jagged plasterboard nails
      1

      £5

      Merthyr Tydfil - 39 miles

      30mm jagged plasterboard nails galvanised 3kg boxes, 6 x 500g packs per box £5 per box

      Read more
    • 3 inch and 4 inch round head galvanised nails
      1

      £10

      Merthyr Tydfil - 39 miles

      Brand new galvanised nails 3 inch and 4 inch round head 12.5 kg boxes or 10 kg tubs £10 per box £10 per tub

      Read more
    • JOBLOT SPANNERS ASSORTED SNAP ON BRITOOL TIPCO ......
      8

      £60

      Witney - 49 miles

      all in good as new condition some with few marks no packaging Double End Flare Nut Wrench 6 pt RXFMS1314B RXFMS1012A RXH810S Open End Flare Nut Wrench William superslim 8mm Double Flare Nut Line Wrench RXH1214S 3/8 - 7/16 Metric Combination Spanners OX1M5.5...

      Read more
    • Co-Tech Multitool
      2

      £15

      Cardiff - 25 miles

      A multi-functional machine that saws, cuts and sands wood, metal

      Read more
    •  Blacksmiths Anvil
      2

      £350

      Bargoed - 31 miles

      A Blacksmiths Anvil in good original condition ideal for equestrian yard, farmyard, garden etc

      Read more
    • HONDA GENERATOR
      1

      £50

      Shepton Mallet - 21 miles

      WE HAVE ARE DAUGHTER HONDA GENERATOR FOR SALE £375 PLUS WE HAVE GOT IN ARE GARAGE TWO STROK GENERATOR FOR £50 AND ONE OTHER ONLY £50 TO CLEAR SPACE NEEDED ONO TELEPHONE

      Read more
    • Dremel
      4

      Cardiff - 29 miles

      Dremel complete set. Hardly used. Brilliant for a range of crafts /woodwork. Selection of bits and pieces.

      Read more
    • For sale  Ryobi R18JS-0 One+ 18V Jigsaw with Flush Cut
      1

      £50

      Ferndale - 40 miles

      for sale a used and in full working order Ryobi R18JS-0 One+ 18V Jigsaw with Flush Cut (body only - no batteries or charger)

      Read more
    • PVC Marquee 7x10m 2.6m Sides / Party Tent w. Groundbar, fire resistant white - house of tents
      5

      £1,500

      Bargoed - 31 miles

      For sale a House of Tents 10 x 7m PVC marquee: extra high, fire-resistant and extremely robust and stable With side walls at a height of approx. 2,6 m this marquee provides a great deal of headroom. The tent features an extremely robust and comparatively thicker frame...

      Read more

      National freeads (50 miles or above)

    • Spalding - 146 miles

      AFLATEK Silent10 oil free air compressor. Noise level, db/A - 65 Maximum pressure - 116Psi, 8 bar, Air tank capacity, L - 10 Air delivery - 65l/min, 2.3 cfm Motor speed, Rpm - 1440 Weight, kg - 16 Power supply V - 230V 50Hz, Motor power, W - 1x600

      Read more
    • Ladders
      3

      £60

      Tyn Y Gongl - 145 miles

      2 Ladders and a Tower Scaffold First Ladder is 12ft Long Extends to 24ft Approx Second Ladder is 10ft Long Extends to 20ft Approx Tower Scaffold is 18ft High Approx Price is for the Lot Collect from Benllech LL74 8TU

      Read more
    • Angle Grinder
      5

      £10

      Birmingham - 78 miles

      2014 Parkside PWS 230 A1 electric Angle grinder. Comes complete with tools, side handle and three spare grinding discs. Only used once, will come in handy for someone. Bargain price to clear £10

      Read more
    • BOSS YOUNGMAN  ALUMNIUM  SCAFFOLD TOWER BLUE BRACE 2.1M
      Premium
      Member
      1

      £19.95

      Hemel Hempstead - 91 miles

      BOSS YOUNGMAN ALUMINIUM SCAFFOLD TOWER BLUE BRACE 2.1M * CAN BE VIEWED AND COLLECTED TODAY * WE ARE ONLY 25 MINS FROM LONDON Brent Cross * OR NATIONWIDE DELIVERY AVAILABLE * 7 DAYS * NEXT DAY AND...

      Read more
    • BOSS YOUNGMAN SCAFFOLD TOWER NARROW EVOLUTION 6.2M WH X 2.5M
      Premium
      Member
      1

      £1,099

      Hemel Hempstead - 91 miles

      BOSS YOUNGMAN SCAFFOLD TOWER NARROW EVOLUTION LADDERSPAN 3T 6.2M WH X 1.8M * FULL BOSS SPEC WITH FOUR OUTRIGGERS COMPLETE CAN BE VIEWED AND COLLECTED TODAY * WE ARE ONLY 25 MINS FROM LONDON Brent...

      Read more
    • Ladder
      1

      £35

      Plymouth - 102 miles

      Small double ladder aluminium no longer being used max height 10 ft approx good for getting in loft

      Read more
    • Halide floodlight NEW
      1

      £35

      Luton - 96 miles

      Unused

      Read more
    • Wanted Roofers Propane Gas Torch
      2

      £12,345

      Blackpool - 160 miles

      Has anyone got a roofers gas torch for sale (similar to ones in pictures) with or without a gas bottle ?

      Read more
    • Grinding wheels aluminium oxide
      2

      £13

      Milford Haven - 106 miles

      Aluminium oxide grinding wheels brand new the larger one is 7 inches in diameter with a centre hole 1 1/4 inch diameter.The spec written on the larger wheell is 1.8 25 31 75 3PA60-15-V100 .The smaller grinding wheel is 5 inch diameter and made from aluminium oxide and the...

      Read more
    • Inventex self adjusting laser level
      5

      £25

      Selby - 170 miles

      Complete as new, moulder case with telescoping tripod, hook and strap, laser enhancing goggles, laser level base, excellent condition, for collection nr selby

      Read more