391 Tools For Sale near Southampton

    Local freeads (in and around Southampton)

  • Welding rods 2.5mm and3.2..
    4

    £4

    Southampton - 1 mile

    Im selling welding rods i bought and dont need now not damp sealed in packs 5kilo box 2.5 mm mild steel rods 5kilos and 3.2mm and 4pks 2kilo mild steel rods mild steel rods i have 5 kilos i have 1 kilo of filling in rods

    Read more
  • Vario tourqe set
    2

    £45

    Eastleigh - 3 miles

    Vario fully insulated 12 pcs torque screwdriver set c/w Velcro carry case Never used Cost over £70 new

    Read more
  • Diesel generator 3k
    7

    £350

    Southampton - 4 miles

    Diesel generator bde3500e 3kw 90db electric start new battery Brought as a back up and hardly used.key start and pull start,230v and 115v long run diesel tank could condition ready to work

    Read more
  • Husqvarna 435 X-TORQ Chainsew 14" cutting bar
    7

    £155

    Southampton - 4 miles

    Husqvarna 435 x-torq Chainsaw 2012 year of manufacture, 14" bar & chain all in good condition Starts runs & cuts perfectly, Thanks for looking

    Read more

    Regional freeads (within 50 miles of Southampton)

  • Wallpaper
    2

    £10

    Waterlooville - 15 miles

    Cream Texture wallpaper 10 rolls altogether, all unopened. Was over £10 per roll.

    Read more
  • Stihl 021c Petrol chainsaw
    1

    £100

    Emsworth - 20 miles

    Stihl 021c Petrol chainsaw 14 inch cut, recently serviced and chain sharpened

    Read more
  • 5 brand new harnesses
    1

    £30

    Southsea - 17 miles

    Never used all brand new 30 pounds for all them

    Read more
  • 110 henry hoover
    1

    £20

    Southsea - 17 miles

    Only used once in gd condition

    Read more
  • Resip saw
    1

    £30

    Southsea - 17 miles

    Six mouth old only used twice

    Read more
  • BENCH GRINDER
    4

    £15

    Alton - 24 miles

    NU TOOL Heavy Duty bench grinder. All Ball Bearing. 220/240 v Model CH6. 370 watt. 6" Wheel. 3 amp. 3000 rpm 1. smooth wheel. 1 course wheel. Good working order.

    Read more
  • Log splitter,log buster5
    5

    £150

    Hungerford - 42 miles

    In excellent condition with the add on 4 way splitter

    Read more
  • Wizard laser  level with remote control
    3

    £50

    Hungerford - 42 miles

    This is a working manual levelling laser level with tripod and staff not used for many years ,has new batteries in it .

    Read more
  • Bostitch second fix pin gun hardly used
    3

    £150

    Hungerford - 42 miles

    Bostitch second fix pin gun GFN166K-E 25mm to 65mm Pins hardly used It's all in the box and ready to go

    Read more
  • S. FLEX 7" ANGLE GRINDER
    3

    £25

    Alton - 24 miles

    German made S.Flex 7" angle grinder 240 V. with some discs. Old but in good working order. Very expensive to buy new. BUYER TO COLLECT FROM ALTON. HANTS. cash on collection preferred.

    Read more
  • Excellent two tier folding step ladder - good condition
    1

    £5

    Wimborne - 25 miles

    Here we have a nice little 2 step ladder for good accessibility to high shelving and/or garage general usage. It's in good condition and folds up easily for simple storage and practicality... Very useful item to have around the house/office etc Bargain Many thanks for...

    Read more
    • ROLLER STANDS
      3

      £10

      Alton - 24 miles

      Roller stands with flip up 300mm. wide roller or ball rollers. Adjustable height from 650mm. to 1100 mm. Used but as new.

      Read more
    • WICKES WD810G HAMMER DRILL 240VOLT PLUS TOOLBOX
      3

      £10

      Sandhurst - 39 miles

      Wickes WD810G 240 volt hammer drill, hardly used in very good condition, also included plastic tool box 50cm x 24cm x 24cm. Buyer to collect

      Read more
    • Paslode Impulse IM350+
      2

      £430

      Reading - 41 miles

      Paslode Impulse IM350+ This Nailgun was bought for a fencing project that didn't take place, virtually brand new, only used a couple of times and has been in storage since. The image contains 3boxes of nail (various sizes), 6 gas cartridge refills, two batteries and work...

      Read more
    • 24" Great Neck Heavy Duty Wrecking/Pry Bar
      4

      £5

      Havant - 17 miles

      24" Great Neck Heavy Duty Wrecking/Pry Bar - Brand new condition, still labelled, never used. CASH ON COLLECTION ONLY - NO POST

      Read more
    • SnapOn Vantage Ultra
      4

      £1,000

      Christchurch - 20 miles

      SnapOn Vantage Ultra Oscilloscope, is in excellent condition and comes with all the leads and back probes needed for your advanced diagnostic needs. If you have any questions please ask and please view the pictures. Many Thanks

      Read more
    • Floorboard Clamps
      3

      £25

      Southampton - 8 miles

      Two steel floorboard Clamps Rusty but screws and springs work Needs TLC to restore Buyer collects from Waltham Chase

      Read more
    • MASTERCHUCK WOOD LATHE CHUCK
      4

      £35

      Alton - 24 miles

      Masterchuck manufactured by Henry Taylor Tools Ltd. Absolutley brand new still in oiled paper with all tools and instructions. .To fit lathe spindle 3/4" x 16. UNF L/H. Internal Grip for Bowls, Hollow Work, Holding Bowls without recess Screw chuck.. External Grip...

      Read more
    • Hedge Trimmer
      3

      £35

      Basingstoke - 28 miles

      For trimming to a fine hedge cost new £90 only used once bow only £35 buyer collects

      Read more
    • Club Hammer Medium Size
      3

      £2

      Havant - 17 miles

      A used but good club hammer, medium size & small handle 07786--012316

      Read more
    • Claw Hammers 2 Pounds Each x 3
      2

      £2

      Havant - 17 miles

      3 different claw hammers 2 pounds each. Other hand tools available including club hammers, saws etc 07786--012316

      Read more
    • SDS HAMMER DRILL
      4

      £25

      Chichester - 27 miles

      TITAN (TTB277SDS) SDS Plus Rotary Hammer Drill 230V. 3 Function (Drill, Hammer and Rotary Hammer), Mains powered, Variable Speed setting with Reverse and Lock-On Switch Capacity in: Masonry 26 mm; Steel 13 mm; Wood 40 mm 1010 W Power Output. Weight 3.5kg...

      Read more
    • Gosport - 11 miles

      DeWalt tool belt, never really used, just gathering dust. Belt size is 39 - 51 inch waist.

      Read more
    • Gosport - 11 miles

      Zag tool box, gathering dust, hardly used. All locking arrangements work perfectly with screws and bits (as seen in the photos).

      Read more
    • Generator  4-2 KVA Honda 5-5 Petrol  Engine
      4

      £295

      Reading - 36 miles

      Generator Honda 5-5 hp engine starts easy,,, 240 volt,,and 110 volt,,can be seen working,, will run garage compressor,, mobile on trolly to move around,,Ideal for lots of uses

      Read more
    • barrow
      5

      £20

      Waterlooville - 16 miles

      Pumped wheel barrow, for all your building needs.Not used so need to sell.

      Read more
    • Danarm 55 chainsaw
      3

      £145

      Blandford Forum - 35 miles

      In excellent condition, suit collector

      Read more
    • PARAMO No10 REBATING PLANE IN ORIGINAL BOX
      9

      £15

      Marlborough - 32 miles

      This plane is in very good condition with the colour finish almost intact, as is the chrome finish. The sole is 10 inches long x 2 inches wide. Comes with original fence and box. Although it is classed as rebate plane, it can be used as a normal plane. £15

      Read more
    • SDS MASONRY HOLE CUTTERS 110MM & 66MM + SHAFT
      5

      £18

      Marlborough - 32 miles

      Up for sale are 2 masonry hole cutters 110mm and 66mm plus SDS shaft. All in good condition. £18 the lot

      Read more
    • black carpenters apprentice box, beautifully made £45
      2

      £45

      Newport - 18 miles

      black carpenters apprentice box, beautifully made £45 please email for further details

      Read more
    • Vintage volt/amp meter, good condition, on a baker lite base and casing missing, £10
      2

      £10

      Newport - 18 miles

      Vintage volt/amp meter, good condition, on a baker lite base and casing missing, £10 please email for further details

      Read more
    • Caravan / Camping Step Stool
      3

      £2

      Havant - 17 miles

      A very sturdy caravan or camping step stool with folding handle in a purple plastic colour 07786--012316

      Read more
    • Box of reamers drills metal pieces
      6

      £20

      Christchurch - 21 miles

      Price for all reamers drills metal pieces Christchurch Dorset price for all

      Read more
    • Black & Decker DN710 / D6 330W Electric Planer - USED
      4

      £12

      Waterlooville - 16 miles

      Black & Decker DN710 / D6 330W Electric Planer 20000 rev / min USED

      Read more
    • Youngman  Extension  Ladder
      1

      £50

      Alton - 25 miles

      Youngman 57000400 3.95m DIY 100 2 section extension ladder --- Manufacturer's image Very good condition, used 4 times Manufacturer's details listed below Features Made from lightweight robust aluminium Strong box-section aluminium stiles for greater rigidity Easy to use...

      Read more
    • Universal Kraft Generator
      3

      £525

      Basingstoke - 26 miles

      Brand new. Buyer Collects. £525.

      Read more
    • Large Record 53E Carpenters Vice  10.5 inch Jaws (Original) Beautiful Condition
      10

      £118

      Maidenhead - 49 miles

      Large Original Record 53E Carpenters Vice in excellent condition, (Colour Blue) looks like new. Well looked after and works perfectly. Jaw width size is 10 1/2 inches with wood block is 11 inch, open to 13 inch width inside measurements of wood blocks, 14 inch without...

      Read more
    • VINTAGE Wooden Carpenters Tool Box
      7

      £65

      Maidenhead - 49 miles

      Wooden Carpenters Traditional Tool Box Traditional carpenters tool box with one long piano hinge, with inside removal tray with handles and slots for rule and saws inside lid. Their is a staple for padlock also fitted. Traditionally made dovetail joints, this box will...

      Read more
    • Painter & Decorator Belt Buckle.
      6

      £6.50

      Maidenhead - 49 miles

      Vintage type Painter & Decorator Belt Buckle made in the USA, embossed from in silver ID V-50 1988 Very nice condition never worn. 3 1/4 inches wide by 2 1/2 inches height. Will last for years, bargain £6.50 Buyer collects but if posted add £2.90 ~UK mainland...

      Read more
    • NEW - RAGE7-S: 710W Corded Laser Jigsaw with Variable Speed Control.
      7

      £55

      Maidenhead - 49 miles

      RAGE7-S: 710W Corded Laser Jigsaw with Variable Speed Control. Comes with base plate otherattachments, guide, spare motor brushes, etc. Two years warranty A powerful and versatile Jigsaw, capable of cutting many different materials. A large cutting capacity of up to...

      Read more
    • Bosch GMF1400C router set
      6

      £225

      Portsmouth - 15 miles

      Bosch GMF1400C professional router with case, in very good condition with little use. Collection only from Portsmouth

      Read more
    • Makita HR3210C hammer drill and accessories
      5

      £275

      Portsmouth - 15 miles

      Makita HR3210C 240 volt hammer drill with accessories as new condition, everything in photos is included. This machine includes the HR3210C, 18 piece mixed bit set, 5 piece SDS+ dominator bit set, keyless drill chuck, chuck adaptor, cold chisel and scaling chisel. It...

      Read more
    • HME welding station
      4

      £250

      Basingstoke - 25 miles

      This is a unused welding station everything in picture is in the price, sorry cant tell you a lot more info as I have little or no knowledge in welding.

      Read more
    • Ezicat i650
      5

      £100

      Romsey - 6 miles

      Ezicat i650 I don't know anything about theses things but seems to be working ok as u can see from picture and in good condition apart from crack in Handel and some scratches but don't effect it working as u can see from pictures

      Read more
    • Oval Gear Diesel Fuel Flow Meter 12-120 LPM, 1"BSP Brand New, 10 Available, RRP £142.50 + VAT
      1

      £45

      Blandford Forum - 37 miles

      Surplus to requirements, 1" BSP Oval Gear Flow Meters, suitable for use with flow ranges of 12 to 120 Litres Per Minute (NO GOOD FOR DOMESTIC HEATING LINES) suitable for refuelling or other fluid measurement applications. Suitable for use with diesel, heating...

      Read more
    • Orange 220 / 200 Litre Plastic HDPE Barrels, Drum Tank Water Butt Waterbutt Brewing Home Brew
      1

      £15

      Blandford Forum - 37 miles

      Orange 220 / 200 Litre Plastic HDPE Barrels, Drum Tank Water Butt Waterbutt Brewing Home Brew 220 litre plastic drums, used once for transport of food products in brine, now empty. Solid construction, lid screws off, waterproof rubber seal. Colour orange, excellent...

      Read more
    • Farnborough - 38 miles

      pipe vice with stand and set of pipe thread cutters with ratchet and handle.would cost you double. A bit dirty from storage ,But has never been used. GRAB A BARGAIN.

      Read more