You have location turned off. To allow freeads to access your location and show ads near you, please turn this on in your devices settings.
Sorry, the ad you are looking for is no longer available. Please see similar ads below.
This rifle is pretty much spot on as far a function and form are concerned, very accurate and consistent.
I have just added £70 worth of a quick fill conversion with gauge so the cylinder doesn't have to be removed to fill, it's also modded to remove the original shroud that was integral, and caused POI shift.
It also has custom made bits, like a cocking leaver extension that is ambidextrous, and some nice custom American ash wood grips, cheek rest and hamster, (std bits will also come with it) and some other nice turned alloy spacers to make it adjustable for a custom fit, it is mostly Walther, both the polished stainless match grade barrel and cylinder are Walther and well known for their quality.
The trigger is well balanced two stage and very good and fully adjustable.
It is very accurate and will put pellet on pellet at 35 +yds, if you're up to it, it is adjustable for power so you can set it where you want, its currently set to 11.5ftlbs with 8.44 gr pellets, FPS is also very consistent, and only varies 7fps maximum,
It will come with a spare regulator, and will run from 300bar down to 100bar, and get you around 170+ shots, or 80 shots from a 200bar fill, both regs are rebuildable and can be set to 12FTlb or 6FTlb for practice and indoor 10mt target shooting depending on how the washer stack is configured.
There are a couple of small marks on the action anodising, and the rest is in good condition,
Gun comes with custom muzzle brake and not the moderator shown in some pics, and no scope, but can add a cheaper scope for the right deal.
Price is £500, these cost over £860 new...if you can find one.