2x JAMMA 56 pin (2x28) Adaptor Fingerboards - v2 PCB, 6 button compatible - NEW! in Farnham

£6

Scott

Posting for 1+ year

Farnham

£6

Report Watch

Message Me

2x JAMMA 56 pin (2x28) Adaptor Fingerboards - v2 PCB, 6 button compatible - NEW! in Farnham

£6

Scott

Posting for 1+ year

Farnham

£6

2x Paradise JAMMA / CHAMMA Adaptor PCBs (v2)
Used for making various arcade wiring adaptors.
Incorporates design features to make DIY JAMMA adaptors easier

If you're annoyed at how fiddly it can be to make robust JAMMA adaptors for the many other arcade wiring types, then this little PCB is for you!
This JAMMA adaptor board packs in a load of features to make your DIY adaptor creation a lot less hassle!

Rather than having to physically saw off one side of cheap adaptor PCBs to enable a JAMMA edge connector to be soldered on directly, or having to use hot-glue to give the adaptors any strength, here you have dual sided
connection 'fingers' to make connector attachment easy.

When creating 'pass-thru' wiring on a normal adaptor PCB you need to solder almost 50 individual short wires for all the pins. On this adaptor PCB you can just dab a blob of solder on the easy-solder links in the central area.

In 6 button 'CHAMMA' wired Candy cabinets, normal adaptors require the ground connections to be scored out to allow the 6th button to work properly. This adaptor PCB features an optional link between the button 6's and ground connections, meaning it can easily be used in either configuration.
(Particularly suitable for use with Game Elf, Pandora's Box, or Pandora's Key systems)

- Connection 'fingers' on each side, so you can solder an edge connector on the non-jamma side easily
- Central easy-solder linking pins (so if you are doing pass-thru wiring, just a dab of solder will do - you don't have to connect any wires)
- Large circular easy-solder pads for attaching adaptor wiring connections
- Wire-holder cutout shapes at the top and bottom edges of the board, to tame your spagetti hoop mess of adaptor wires
- Optional link on pins 27/28 & e/f so you can choose to connect them for 'standard JAMMA / dual ground pins' or leave them separate for button 6 use (CHAMMA) Read more